Special Bearings

Series : Round Bore Non – Relubricable | Square Bore Non – Relubricable | Round Bore Relubricable | Square Bore Relubricable | Hex Bore Series | 200 Series | Flanged Disc Unit | Special Bearings

Category: Tags: ,

Description

FARM BORE O.D. OUTER RING INNER RING DESCRIPTION OF SPECIALITIES
RADIAL d D WIDTH – B WIDTH – C
SPECIAL Inch mm Inch mm Inch mm Inch mm
RX84 0.6945 17.640 2.1248 53.970 0.6248 15.870 0.7949 20.190 Hex bore, attached flange. Trash seals
X365 1.0000 25.400 2.0000 50.800 0.5906 15.000 0.7100 18.034 Snap ring. Trash seals.
202NPP9 0.5050 12.827 1.5000 38.100 0.4331 11.000 0.4331 11.000 O.D. turned to 3/4 radius. Trash seals
202RRE 0.5906 15.000 1.3780 35.000 0.4331 11.000 0.8800 22.352 Special bore,extended inner ring. Trash seals
203JD 0.6693 17.000 1.5748 40.000 0.4724 12.000 0.5512 14.000 Inner ring extended one side. Trash seals
203KRR3 0.6280 15.951 2.0000 50.800 0.5906 15.000 0.5906 15.000 Thick outer ring, two inch O.D. Trash seals
203KRR6 0.6400 16.256 1.8504 47.000 0.4724 12.000 0.7200 18.288 Thick outer ring, extended inner ring. Trash seals
203NPP9 0.6260 15.900 1.5784 40.000 0.5100 12.950 0.5100 12.950 Special bore, special width. Trash seals
Z9504-2RST 0.7500 19.050 1.7805 45.225 0.6100 15.494 0.6100 15.494 Basic 6204-2RS with 3/4 bore and 6100 width. Trash seals
204KRD4 0.6300 16.000 1.8504 47.000 0.5512 14.000 0.6890 17.500 Special bore. Trash seals.
204KRR14 0.6310 16.027 1.8504 47.000 0.5906 15.000 0.7200 18.288 Special ID, width. Trash seals.
204RR8 0.6310 16.027 1.7805 45.225 0.6100 15.494 0.6100 15.494 Special bore, special OD, special width. Trash seals
204RY2 0.6310 16.027 1.7805 45.225 0.6100 15.494 0.7350 18.669 Gothic arch race. Double lip trash seal extended side,
single lip trash seal opposite.
205KRP2 0.7560 19.202 2.0472 52.000 0.5906 15.000 0.8310 21.107 Special bore, triple lip trash seal extended side,
single lip side opposite.
205KR3 0.7510 19.075 2.0472 52.000 0.7000 17.780 0.6400 16.256 Special shroud seal one side only.
205KP6 0.7560 19.202 2.0472 52.000 0.7000 17.780 0.9210 23.393 Inner ring extended one side, inset side opposite.
Triple lip extended side, open side opposite
205KRR6 0.5150 13.081 2.0472 52.000 0.5906 15.000 1.3750 34.925 Special bore, extended inner ring. Trash seals.
205KRR7 0.5120 13.000 2.0472 52.000 0.5902 15.000 1.5000 38.100 Inner ring extended both sides, bearing not centered
on inner ring. Trash seals
G205PPB7 0.9375 23.813 2.0472 52.000 0.5910 15.000 1.3780 35.000 Same as 205PPB7 with grease groove.
205PPB7 0.9375 23.813 2.0472 52.000 0.5910 15.000 1.3780 35.000 Beveled OD. Triple lip seals.
205PP8 0.5104 12.964 2.0472 52.000 0.5910 15.000 1.3750 34.925 Special bore, extended inner ring. Triple lip seals.
205PP9 0.7560 19.202 2.0472 52.000 0.5910 15.000 1.3750 34.925 Special bore, extended inner ring. Triple lip seals.
205PP10 0.6300 16.000 2.0472 52.000 0.5910 15.000 1.3750 34.925 Special bore, extended inner ring. Triple lip seals.
205PP12 0.6350 16.129 2.0472 52.000 0.5902 15.000 1.5000 38.100 Inner ring extended both sides, bearing not centered
on inner ring. Triple lip seals
206KRRB 0.7580 19.250 2.4409 62.000 0.6300 16.000 0.9450 24.000 Special bore, extended inner ring. Triple lip seals.
206PD2 1.2500 31.750 2.5625 65.088 0.6693 17.000 0.7293 18.524 Special O.D., extended inner ring. Trash seals.
207KYY 1.3780 35.000 2.8346 72.000 0.6693 17.000 0.9843 25.000 Extended inner ring. Double lip seal.
FHR208-25CD 1.5625 39.688 3.1496 80.000 0.7087 18.000 1.1890 30.200 Back side extended slightly . Trash seals.
W213-8445 2.1880 55.575 4.7244 120.00 1.1380 28.905 2.1780 55.550 Extended inner ring both sides. Open, no seals or shields
88120-C4 0.7874 20.000 1.8504 47.000 0.5510 14.000 0.8190 20.800 Extended inner ring both sides. Trash seals.
88128R 1.5312 38.892 3.1496 80.000 0.8268 21.000 1.0830 27.500 Bearing supplied with an axel ring

Reviews

There are no reviews yet.

Be the first to review “Special Bearings”

Related products